The inaccurate positioning of the cam splitter refers to excessive positioning accuracy error. Generally speaking, as long as the workpiece of a mechanical structure has a certain error value, it is normal as long as it is within a reasonable range. However, if it is too large, it will affect the processing. Therefore, it is necessary to first determine whether inaccurate positioning is normal. In actual maintenance, it is necessary to first check whether the positioning error is the output shaft up and down error or the left and right error. The following steps can be installed to check.

1. Lock the disc on the output shaft tightly and check for positioning errors caused by looseness;

2. Check if the error between the workstations on the disc is too large;

3. Check if the bearing of the input shaft is worn, and if the oil seal of the input shaft is damaged;

4. Check whether the torque input of the input motor is normal and whether there are sometimes large and small situations; You can use a dial gauge to check the accuracy and see where the problem is. The accuracy of the cam splitter is very important. If you cannot solve it on your own, you can contact technical personnel for assistance in maintenance.